Components/Specifications
Blade: 10" x 2 1/8 x 3/16" 5160 steel, hand rubbed bevels to 600, flats to 1000 with a file worked spine and a bolted hidden tang.
Handle: 5 5/8" long Old Growth Redwood burl with a buffed Danish oil finish and a moose antler guard. Spacers of Bloodwood veneer, ebonized Pear, and moose antler. The bolt plug in the butt end is flush sanded antler as well.
Sheath: Fully doe-skin lined, Quilted Redwood case with buffed tung oil and Carnuaba wax finish. One piece Jatoba welt. The inlaid, glued and stitched belt loop harness is 6-7 oz. veg tanned leather dyed dark brown with buffed mink oil finish. The knife retention strap stud and two shoulder strap studs are turned moose antler with Abalone inlay. Three moose antler D-ring attachment points allow for the sheath to be slung vertically or horizontally in addition to being hung by the conventional belt loop.
Handle: 5 5/8" long Old Growth Redwood burl with a buffed Danish oil finish and a moose antler guard. Spacers of Bloodwood veneer, ebonized Pear, and moose antler. The bolt plug in the butt end is flush sanded antler as well.
Sheath: Fully doe-skin lined, Quilted Redwood case with buffed tung oil and Carnuaba wax finish. One piece Jatoba welt. The inlaid, glued and stitched belt loop harness is 6-7 oz. veg tanned leather dyed dark brown with buffed mink oil finish. The knife retention strap stud and two shoulder strap studs are turned moose antler with Abalone inlay. Three moose antler D-ring attachment points allow for the sheath to be slung vertically or horizontally in addition to being hung by the conventional belt loop.
